sykes

cheers guys will have a bash at stripping it and hope it will free up

the choke on my 2007 bike is operated by a lever on the handlebars which in turn pulls a cable that goes into the carb, so it looks like when i pull the lever on the handlebars it pulls on the cable and pulls the choke to the up position in the carb, which i take it is the on position...when the lever is released it looks like the spring thats encased on the cable end on top of the carb pushes the choke slided back down to the off position....i think the older models just had the pull up push down directly on top of the carb but the cable setup is meant to be more convenient. the problem looks like the slider is maybe seized to the side of the carb as i gave it a bit of a push and it would not move so seems to be stuck in the up position looks like a bit of cloudy fluid around the top of the slider so i am thinking if it was maybe water getting down the cable to the carb and then reacting with the different metals between the carb and slider and causing it to stick....i just dont want to put too much pressure on it incase i damage it so was wondering if anybody else had problems with this and how to go about fixing it. i know this is a bit long winded but it hope it is a bit clearer.....as mud..

hi all i seem to have the choke stuck on the bike....i took the cable of at the top of the carb and the spring is ok but it looks like the choke is stuck in the up (on) position as i take it the spring should push it down once the choke lever cable is released? so looks like the choke slider seems to be stuck to the sides of the carb anybody else had trouble with this and any ideas how i could free it without damage.? cheers for any ideas

cheers andy checked with birkets today and even they were unsure as they reckon the bearing may have changed in the later ones but said it should be the same as the sy 250 and that was 6905 front which is thin type bearings and the rear is 6004, but i suppose the only way to be sure is to knock them out and see. did a search for more info today and seen this guy selling them on the bay called Gap Bearings,,,,very cheap so wonder if they would be ok as 6004 were only £1.80 each posted.

hi does anyone know what size and part number for front and rear wheel bearings for this bike and the best place to get them its on a 2007 plate cheers..

hi anyone know how to adjust the play in the rear brake or these bikes? i had the caliper off and everything is moving ok but the brake is not coming on fully to lock the back wheel. it feel like the foot pedal is bottoming out where the adjuster rod is on the brake pedal. online manual says it should be adjusted by slacking the lock nut and shorten or lenghten the rod, but i cant see how it is adjusted as it just looks like a locknut on a threaded rod, but how do i adjust the rod. its pretty hard to get to also as the diagram shows just adjust the rod but the adjustment end goes ito a rubber cover and then it is some kind of valve that takes the brake fluid clear as mud as i read it back, but if anyone has any ideas on it can you post it up please see link http://www.scorpa.fr...Ride_Racing.pdf cheers....

hi what oil would be fine for a scorpa 175f? i see they recommend motul 300v fully synthetic, but i cannot get this locally. i take it something like shell advance ultra be fine for this engine as it does not work hard anyway, and i can get it locally....better price too. i want to use good oil, but are some of the recommendations overkill? given it not a race bike.... cheers

hi does anyone know if there is any difference in these new models compared to the older 2007 models? i take it they all now have hydraulic clutch and i think, maybe an electric start. would maybe have rathered a 175 but not seeing any for sale right now, so how does the 125 compare with power/performance any info would be great cheers.....

thanks for the advice guys

i think the add i seen said it was 16 year old so guy must not be sure of actual year what are the last ones made like then?? i just think if it is in ok nick it might do me for a bit.

hi whats the general opinion ot the 96 aprilia climber 240 for reliability and spares just looking for a muckabout until i find the right bike cheers...

cheers for that....thought it might be a bit on the high side

hi i have been offered a 1987 ty 250 mono in what seems reasonable conditon for £750 is this too much to pay for this bike? cheers..

cheers lads

hi what is the difference between the ty250 mono and the pinky version and which one would be the best to have cheers....