Jump to content

steve shakeshaft

Members
  • Posts

    106
  • Joined

  • Last visited

Contact Information
 
   
  1. Bike has now sold. Onto my next project now and perhaps a Yellow Beamish if I see one I like. Cheers.
  2. Correct. And unless you've got a stash of money it's a shame to get it dirty now it is like it is. I'll very likely buy a 79/80 Yellow Beamish to ride. I've not seen another 78 Red/Black one for sale in over 6 months of looking every day. I've seen dozens of Yellow ones. If the right person wants it, they're welcome.
  3. Rock Oil and NGK will both send you some too if you ask via their website.
  4. Somebody else should ride it. I need the money for another bike to ride. If it doesn't sell then I WILL be riding it! Thanks.
  5. I have been offered another bike which if I bought it would mean the Beamish has to go first. What sort of price do you think I can get for it? Here's the spec- 1978 Beamish Suzuki 250. Rare Red/Black model. New Paintwork/Lacquer to Fuel Tank New Chain/Sprockets New Levers New Decals all round New Michelin Tyres Fully serviced with new plug, lead, plug cap and oils Repaired kick start lever New front fork gaiters (still to fit) Previous owner did- New seat cover New Wheel Bearings New WES alloy silencer All stainless fasteners Polished Forks, Yokes etc New head bearings New Swing arm bushes New White Stihl Mudguards New Betor rear shocks To go with the bike- One full engine gasket set One top end gasket set One new spark plug (NGK) One kick start shaft oil seal (OEM) Several Sets of rear sprocket tab washers (OEM) There are no known defects with the bike, overall I'd say it is a 9/10 bike. The bike has not been ridden after this work and is spotless. Your opinions appreciated. Thanks. Steve.
  6. Was it ridden? Or just shown?
  7. Indeed I did and this is a classic case. Use it with complete confidence.
  8. Had a mooch around for a while until the rain got too horizontal and cold. It looked easier to ride than walk around there.
  9. Thanks a lot, I'll see what the lad says. Her indoors seems happy enough to get shot of me for a few hours. Might just pop over.
  10. Thanks a lot. My Beamish is still in bits due to me working in Scotland all this year so far and having no time work on it, let alone wobble around a muddy field I'm in Cheshire, Northwich, so it isn't too far for an hour or twos mooching around. What time is the start please?
  11. Could you be a little more precise with the location please? I might pop over and have a look at what's happening. Thanks.
  12. GG, you're more than welcome. I know very little about trials riding, but I do know a bit about lubrication. Regarding when your favourite brand oil isn't available, just enjoy the ride and don't worry. You've far more to worry about trying to keep your feet up! That's what I do and it works OK for me.
  13. GG, By mixing oils, I presume you are referring to the residual in your fuel tank before switching to another brand or type? Go ahead. If you want to mix brands I can't really see why you would want to purposely do it, but providing you mix the same API spec oils I can't see a problem. Ofcourse you are asking for trouble purposely mixing a 2 stroke oil and a gear oil (say), but that'd be daft to do anyway and I cannot see why you'd want to. A great many of the "synthetic" base oil stocks used in motor oils are not "actually" "true" synthetic oils at all. Many, (in fact I'll go out on a limb here and risk being shot down) most in fact, of the engine oils sold as "Synthetic Oil" are actually highly refined and treated mineral base oils. Nothing at all wrong in this ofcourse. But it does mean that oil based on the "hole in the ground Black stuff" gets grouped in the same manner as Poly Alpha Olefin, Silicone base or Poly Ethylene Glycol stock, which ARE true "Synthetics" (IE do not generally come out of a hole in the ground as black stuff!). These all get lumped together in the eyes of the marketing people as "Synthetics". And it is the marketing folk that decide what it is you read on the bottle that is on the shelf. The Engineers and the Chemists only get a look in where it says something like API SL 20w/50 or a proprietary standard like VW 505.01. Ofcourse, this isn't sexy like "Synthetic" so the marketing folk would rather you didn't read it up front. My honest advice to you, is use what the maker recommends in the way of an industry specification API... (API SL 20W/50 etc) or a makers standard (eg VW505.01 etc), etc... And you'll be OK. For example, here is a brief guide to API standards for motor oils (Petrol and Diesel). API SPEC GUIDE You may notice that the "S" word doesn't appear up front in the text. But I can buy API SJ mineral and API SJ synthetic oil in Halfords. Confused? I bet. Regarding coking of your engine's combustion chamber, perhaps one additive package is a little better in one way than another, but not in others? Perhaps some trials you ride require more throttle than another? Perhaps some trials you ride a lot in one gear? Or wait around a lot ticking over? I don't know. If what you are doing works for you, that's great, but don't get hung up on brands or "synth" v "dino". I honestly hope that helps. But there are always more questions than answers on this subject.
×
  • Create New...