tee dub

Torx T100 is the size. Braktec Tool Part # RP600013013

Just picked up a Vertigo and want to establish my own fresh maintenance schedule. What is the final word on tranny oil from the experts...ATF or 75 - 80 Gear oil? Can't get recommended Castrol here in the USA. Thanks!

Patriot, I'm in central NC. Will be hosting a 2 day Ryan Young clinic at my farm on 12-13 April. Not sure when you're arriving, but you should register and come on over for it. Also hosting a CVOTC & MTR combined 2 day event in Jun at the place. Have 15 - 20 sections and we ride most every weekend. We do ride trials in NC...Check out the last edition of Trials and Enduro News. 2 2013 AMA/NATC National Champions live in Raleigh. Come on out sometime.

Thanks for the info copemech. I'll go back into Sherco USA website and dig a bit harder.

Lineaway, Been to the ShercoUSA website and must say that it's pretty much useless imho. Guess there's not much Sherco news in the good ol US of A, if the last news update was back in the middle of 2013. Maybe I'm looking in the wrong place under "Service Info", but I never saw any torque values. Copemech, As for anti-sieze, I always use it. That's why I'm looking for proper torque values...so I can calculate the reduction factor and torque properly. Could you educate me as to the basic torque values for 6, 8 10 mm bolts. I've seen multiple torque values for the same size bolt depending on where it is used on a bike. Thanks in advance for the info.

New to trials from the Enduro and Rally worlds. I took the plunge and dove straight into the deep end by buying a 2014 Sherco 3.0 2T. Figured that it was the best way to go when I saw what people wanted for 2 and 3 year old used Trials bikes. As you can imagine, coming off KTMs and Husabergs where every possible torque value is published and most all maintenance procedures are well documented, I'm experiencing a bit of frustration regarding the lack of published bike service and setup information. Was raising the forks in the triple clamps just yesterday and realized I didn't even know the proper torque value for the triple clamp pinch bolts, nor was there any information in the manual regarding the max amount that the forks could be raised within the clamp. At this point I'd like to put an "all call" out to all you smart Sherco types for the factory torque specs for a recent year Sherco. Does such a torque spec sheet exist? Any information or links to requested information would be much appreciated. Thanks in advance!