Jump to content

Lefebvre

Members
  • Posts

    40
  • Joined

  • Last visited

Contact Information
 
   
Recent Profile Visitors
 
 

The recent visitors block is disabled and is not being shown to other users.

 
  1. What is the very best gas for your Trial's bike? Very hard to find Ethanol free in Gatineau, Canada. What are the alternatives and recommendation?
  2. Does Bosi Mudguard and Front Fender (with Bosi bracket) fit my 2018 Evo 200. If you have installed these on a 2018 Evo 200 or know it will fit without problems, please let me know.
  3. I find no place where to install it on the frame... Can it be on the handlebars or it will lack vibration?
  4. Thanks a lot for the clarification as I was not understanding the free play as I should have before I read your post. I did readjust the free play with a little over 1 mm of free play before the plunger engage. I guess you can set the lever tight to the bar or 3/4" away from it as long as you readjust this free play of the plunger as you explain. Again, thanks a lot.
  5. Motorcycle is a 2018 Beta 200. How much free play is recommended from the clutch lever to the bars? None, finger thickness? Does one choice make the clutch drag and the other one not?
  6. The mechanic trick worked, the bike was already on the stand and soon as I turned the back wheel and pushed down on the shifter, it went down in 1st gear. The gear was not stocked in 1st gear, it did not want to go down from neutral to 1st gear. I also had succeeded to go in second when trying to shift the gear prior to that. I will now roll the bike back and forth as you did advise me in your message should it be needed to change gear when the engine is with power off as it was. Thanks a lot Dan!
  7. No, the shifter is not hitting anything.
  8. Dan, just called the mechanic and he said to put the bike on a stand and try to push on the shifter down and roll the back wheel at the same time to see if it will fall in place. What do you think? He said he just change the bolts, no removal of the assembly.
  9. Hi! My Trial 2018 Beta Evo doesn't shift in 1st gear while power is off? Normal? The only change my mechanic did this winter is installing the clutch spring retainer to ease lever action. Thanks for your help.
  10. Lefebvre

    Older gas

    The question is just to know how long fuel can sit in the tank. Not a money question as fuel is cheap in Canada. Some say fuel should be removed after 5 to 6 weeks as it affects the carb, others say they drain their carb after each ride, some like you say not to worry, some others say residues in the carb could be very bad if it sits there for weeks...Thanks for your input.
  11. Lefebvre

    Older gas

    If your Off Road bike has been sitting in a heated garage for +/- 5 months with a few liters of mix gas (Ethanol free) in the tank, should you drain this older gas and refill with fresher one? Thanks for your help.
  12. My 2018 Beta 200 Evo will go to the mechanic next week. I did no change for the rad coolant and it is as the dealer or Beta did for coolant inside the rad when I bought the bike. Is it safe to travel with the Evo in my trailer for 2 hours at -20C* outside. It is winter here. The coolant must be freezing proof as other bikes unless you change it? Thanks for your help.
  13. How can you change a 2018 Beta Evo 200 to a 250 power wise? If not possible, can you improve the power quite a bit with other changes to the engine? Thanks a lot for your help.
  14. Hi! I would really appreciate if someone could help me at setting the right tension on my 2018 Beta Evo 200. I cannot find any video on it or pictures with comments. Thanks for your help!
  15. My bike is a 2018 Beta Evo 200. What is the front and rear static sag and loaded sag? For the rear, I have 15mm static sag and 101mm loaded sag. The front is 48mm loaded sag. Do I need changes. Thanks. +
×
  • Create New...