Jump to content

sparkybill

Members
  • Posts

    8
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://
  • ICQ
    0
Contact Information
 
   
Recent Profile Visitors
 
 
1,613 profile views
 
  1. The spacer in the middle is from the EVO and the two outside ones are from the REV 3 rear wheel. Hope this helps you.
  2. He may be using the extra fast throttle that came on the 2019 Gold,this is a picture of it.
  3. Yes a 10mm is the size for the rev rear axle.
  4. Tie your light to the yellow wire from the from the stator. This will power the light and ground it to the ground at the triple clamp. I added an aftermarket switch with an Led light which works fine but I only use my Rev for trail use. Hope this helps.
  5. You are right, the factory model in 2013 was the only one that used the longer shock and in turn had a different Delta link, so for your 2016 shock all you need is the stock Delta link and it will work as I have done the same. Part number 7.33.030 will work plus you will need to get new roller cage (two) plus spacer with dust covers, as your 2013 ones will be well worn by now. Hope this helps.
  6. I have a 06 REV with the long range tank that I just use for trail rides so I do not use it that much. So I took that rear wheel and use it as my practise wheel on my EVO.It was easy to convert over,I bought an EVO disc as it is smaller diameter than the stock REV disc,drilled it out so I could use the floating disc system from the REV hub,(the floating disc always worked good in my opinion anyways) mounted the disc.You could machine your REV disc to the same diameter as the EVO disc if wanted to.I took the longer of the two REV wheel spacers and used it on the sprocket side,bought another longer wheel spacer to match and used it on the disc side plus a 2.5mm washer. I am sure you could just make up a new longer spacer for the disc side.That was all I did used it for over a year has worked great and when I use my REV I just changed discs and wheel spacers and keep the EVO wheel with a good tire for competitions.Hope this helps Bill
  7. Hi Matt Did you get the wheel spacers mixed up when you changed the bearings I know on the Rev one is longer than the other. Just a thought,you have the wheel washer in the right spot. Bill
  8. sparkybill

    Beta Rear Disk

    The Rev disc is larger but the main problem is the bolt holes as the Rev used a floating rear disc so it has a larger diameter hole to bolt on to the hub compared to the Evo disc. Hope this helps you. Bill
×
  • Create New...