Jump to content

arun1664

Members
  • Posts

    210
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://
  • ICQ
    0
Contact Information
 
   
  1. arun1664

    Ty175 Age

    Cut the frame in half and count the rings or look at this page on the TY trials web site TY Trials
  2. Found the following on the Pathe News Archive Site, thought they may be of interest to some of you. British Experts 1932 Colmore 1932 Leinster 1925 Bemrose with sound Southern Trial Yorkshire in the Snow
  3. I think what you are saying here is that the Labour Government installed the SNP in the Scottish Parliament to do their bidding in Scotland It was a monumentally stupid decision to release the bloke IMHO, but this one belongs to the Scots I would say.
  4. I have the shorter length shocks (came with the bike) but have dropped the forks in the yokes to improve the steering . Statement on the obvious, longer shocks will give you the same improvement but without the (small) loss of ground clearance. In all my dealings with TY trials I have found him to be knowledgeable and helpful, if and when I replace my shock I would happily accept his advise and buy the longer ones. Hope this helps ...
  5. I think its a French company, their website says Sherco S.A.R.L which is a type of limited company used in a number of countries which don't include Spain, see Wikipedia SARL if its to be be believed. Further evidence should it be needed that they are French is the bikes tendency to run backwards occasionally
  6. Suppose this thread will now degenerate into a discussion on which WTC Rider has the biggest pianist.
  7. I think the picture comes from the recent publicity event for Colgates new @nal floss product and has nothing to do with Canadians, but I might be wrong
  8. Do you mean one of these ....TLR Head Gasket
  9. JK Hirst carry a lot of parts, may be able to help JK Hirst Web Site
  10. Ok, presumably those of you who have started up your own companies (and by the way I wish I had the vision/courage to do the same) reserve the right to charge the maximum the market will stand, as an employee I expect to do the same. I will keep justifying and asking for better pay and conditions. I don
  11. Disagree, having worked for large multinationals most of my working life they are full of people doing above average work for their salary. They don't promote themselves and as such tend to come second place to those who make a better job of presenting themselves as the high achievers (which they may well be as well). You should always push your boss for a rise but bring data.
  12. If you want to annoy him tell him how disappointed you are with your performance and tell him you want to improve and schedule a meeting with him to develop an action plan (couple of hours should do it) then be sure to have monthly meetings with him to make sure you are following the plan and measuring your progress. Wont get you anywhere but it will get up his nose.
  13. If you are going to lap the head suggest you do it by rubbing in a figure "8" pattern. Apologies if I am telling my mother how suck eggs :-)
  14. Pretty sure the steel liner is as it came out of the factory, I think they sleeved the 250 barrel down to get the 200cc. There is a first oversize available (at least for the Rev 3) but nothing after that. However Nigel Birkett knows of a piston that will allow larger oversizes should they be needed. Hope you get satisfaction from the dealer but if not a 200 Beta really is an great beginners bike so you could be a lot worse off. Anyhow, best of luck sorting it out
×
  • Create New...