if i leave the bike for a week on starting it the clutch will not clear at all until i have rode round for about 5 mins. it is then ok. i have replaced the oil with 400 cc of dexron 3 but the problem was still there today although this was the first time the bike had been started for a week. any advice would be appreciated
0
2 replies to this topic
#2
-
- Members
-
- 256 posts
Advanced Member
- Location:northampton
- Bike:hondas
- Club:nene valley
Posted 24 February 2007 - 09:03 PM
this is normal most italian trials bikes seem to have this problem
#3
-
- Members
-
- 270 posts
Advanced Member
- Location:netherlands
- Bike:gasgas 250 pro
Posted 24 February 2007 - 09:55 PM
No, sorry, it is not normall. Right away with start up the clutch shld work.
The clutch works with a disc-spring and debris cld become a problem when they have accumulated over the years. I assume this bike is not brand new?
Start with cleaning the clutch inside-out. And change the clutch(brake)hydraulic fluid while yr to it.
That wld probably solve it.
The clutch works with a disc-spring and debris cld become a problem when they have accumulated over the years. I assume this bike is not brand new?
Start with cleaning the clutch inside-out. And change the clutch(brake)hydraulic fluid while yr to it.
That wld probably solve it.
Edited by gasgas, 24 February 2007 - 09:56 PM.
george
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
