hi can anyone please tell me what the correct amount of turns is on the mixture screw when fully screwed in i heard it was about 2.5 turns out does anyone know if this is right ?
0
2 replies to this topic
#1
-
- Members
-
- 13 posts
New Member
- Location:west yorkshire
- Bike:gasgas 280 pro
Posted 11 February 2008 - 09:37 PM
#2
-
- Members
-
- 270 posts
Advanced Member
- Location:netherlands
- Bike:gasgas 250 pro
Posted 11 February 2008 - 10:33 PM
Rend, sorry to tell you but there is no exact amount of turns for the mixture screw. You have to listen to yr bike to determine how many turns you need.
Out is richer, in is leaner. Your bike/carb may need 3 turns, mine 2,5 etc.
Out is richer, in is leaner. Your bike/carb may need 3 turns, mine 2,5 etc.
george
#3
-
- Members
-
- 7 posts
New Member
- Location:bath
- Bike:gasgas 280 2001
Posted 12 February 2008 - 12:03 PM
mine was about two and a half turns just make sure your bike is up to temp when your doing it, i found if you have a little ride after you've adjusted it you get a better feel for were it needs to go.......
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
