Jump to content

Clutch Noise I Think


ythan
 Share

Recommended Posts

Bata rev 3 a 2003 250 has a whine from what seems to be the clutch, not sure if i am truthfull.

It seems to get a little quieter as it gets warm, WHAT IS IT! causing this whining sound.

All the gears work fine and the clutch is fine(once initialy cleared from stone cold) if just a little heavier than my sherco.

Help. it is niggling me.

Edited by ythan
Link to comment
Share on other sites

 
  • 2 weeks later...

Well my findings! As for the clutch drag from cold i changed the oil to Castrol Dexron Mercon III Atf, this as Improved the clutch and the whiring noise is a lot quieter.

I took notice of a few betas at trials and it is now about the same as others, Good stuff that ATF if you have issues as the above post, i would do as i did it was a shock just how much it changed things for this bike.

Link to comment
Share on other sites

 

The whining of a Beta is usually the primary drive gears - the gears that transmit the power from the crankshaft to the clutch basket. Betas and a few other bikes make that noise because the primary drive gear teeth are straight cut and this is a good thing as it prevents side loading of the crankshaft and clutch bearings and reduces the overall power lost through the gearbox. Many people like the noise and even seek it out.

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...