Is there anybody manufacturing replica hubs ?
Any info would be appreaciated. Ross
0
5 replies to this topic
#1
-
- Site Supporter
-
- 2,553 posts
Advanced Member
- Location:Edinburgh
- Club:Stevenson, Perth & District, Edin' St George.
Posted 10 October 2008 - 02:55 PM
Cleaning a section is like setting fire to Joanna Lumleys shoes.
(.)(.) + £ = ( . )( . )
#2
-
- Members
-
- 4,015 posts
Advanced Member
- Location:North Scotland
- Bike:Various
- Club:Inverness & District
Posted 10 October 2008 - 03:33 PM
B40RT, on Oct 10 2008, 03:55 PM, said:
Is there anybody manufacturing replica hubs ?
Any info would be appreaciated. Ross
Any info would be appreaciated. Ross
Answer, yes, Alan Whitton Race Engineering. They are available at a price (not cheap!)
They are not all that light either, I had one in my sweaty palm the other night, not much lighter than the steel original to be honest, but I'm sure someone will shoot me down in flames for saying so!
Big John
Edited by Big John, 10 October 2008 - 03:34 PM.
"A Gentleman can never have too many motorcycles"!
Highland Classic 2 Day Trial (UEM) 9/10 June 2012, Alvie Estate, Aviemore, Scotland..."The Friendliest and Biggest Classic Trial in Scotland" ™!!
"Just Shut-Up and Ride!"
On any Sunday, I'm a flyin' Man!
and finally...It's just my personal opinion!
Highland Classic 2 Day Trial (UEM) 9/10 June 2012, Alvie Estate, Aviemore, Scotland..."The Friendliest and Biggest Classic Trial in Scotland" ™!!
"Just Shut-Up and Ride!"
On any Sunday, I'm a flyin' Man!
and finally...It's just my personal opinion!
#3
-
- Site Supporter
-
- 2,553 posts
Advanced Member
- Location:Edinburgh
- Club:Stevenson, Perth & District, Edin' St George.
Posted 10 October 2008 - 04:28 PM
Thanks Big John
Will give him a call tomorrow, if there in. Any idea of the approx cost, and can they produce one similat to a widened cub hub ?
Thanks Ross
Incidentally these are the wheels I mentioned as having been so reliable ! Obviously tempted fate.
Will give him a call tomorrow, if there in. Any idea of the approx cost, and can they produce one similat to a widened cub hub ?
Thanks Ross
Incidentally these are the wheels I mentioned as having been so reliable ! Obviously tempted fate.
Cleaning a section is like setting fire to Joanna Lumleys shoes.
(.)(.) + £ = ( . )( . )
#4
-
- Members
-
- 4,015 posts
Advanced Member
- Location:North Scotland
- Bike:Various
- Club:Inverness & District
Posted 10 October 2008 - 04:31 PM
The one I saw was a rear widened type, so yes they are available.
Big John
Big John
"A Gentleman can never have too many motorcycles"!
Highland Classic 2 Day Trial (UEM) 9/10 June 2012, Alvie Estate, Aviemore, Scotland..."The Friendliest and Biggest Classic Trial in Scotland" ™!!
"Just Shut-Up and Ride!"
On any Sunday, I'm a flyin' Man!
and finally...It's just my personal opinion!
Highland Classic 2 Day Trial (UEM) 9/10 June 2012, Alvie Estate, Aviemore, Scotland..."The Friendliest and Biggest Classic Trial in Scotland" ™!!
"Just Shut-Up and Ride!"
On any Sunday, I'm a flyin' Man!
and finally...It's just my personal opinion!
#5
-
- Members
-
- 808 posts
Advanced Member
- Location:banbury oxon
- Bike:bsa Otter's Etc,
Posted 10 October 2008 - 05:57 PM
Hi Guy's
Yes Alan's yer man and I think he makes standard, wide, and wider. but you will have to check. But they are very well engineered, just check out the detail. Anything lighter may well brake (Get It).
Regard's Charlie
Yes Alan's yer man and I think he makes standard, wide, and wider. but you will have to check. But they are very well engineered, just check out the detail. Anything lighter may well brake (Get It).
Regard's Charlie
#6
-
- Site Supporter
-
- 2,553 posts
Advanced Member
- Location:Edinburgh
- Club:Stevenson, Perth & District, Edin' St George.
Posted 10 October 2008 - 09:03 PM
Thanks Charlie P
Cleaning a section is like setting fire to Joanna Lumleys shoes.
(.)(.) + £ = ( . )( . )
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
