6 replies to this topic

[Somerset Steve]

Happy New Year to all.
I am re-building a 200. It was fitted with a TY 250 front wheel and a TY rear. I have sourced a front wheel from on any sunday motors down here in Somerset. It is rather bent but will do for the time being. I would like to get hold of the correct rear wheel. I will need break plate, spindel and spacers. Any one have any idea where i can source one?

[shazsdad]

Steve,

Which model of 200 do you want as there is at least 3 rear wheels fitted to Fantic 200's, on rear kick models they had full widith hubs to start with then went to conical hubs and finally in 84 they fitted the same rear wheel as the 240 which I believe has a different brake plate.

[Lee Harris]

this will fit it even if the motor wont. Its a 201 not a 241 as the ad says

L

http://cgi.ebay.co.uk/FANTIC-240-301-MONO_...A1%7C240%3A1318

[Somerset Steve]

Can anyone tell me if this wheel will fit in the 200? Item on e-bay.
Item number: 200295610168
Steve.

[Lee Harris]

steve, pm me your nuzmber again
L

[Lee Harris]

all hubs are same at the rear except bearing spacing. 200 are flush opposite sprocket, 300 and 240 recessed ca. 20mm . The 300 brake plate wont be usable. pm me
L

[Lee Harris]

nobody answering???????????