Edited by nickrhinos, 28 February 2009 - 11:17 AM.
1
8 replies to this topic
#1
-
- Members
-
- 27 posts
Member
- Location:leeds , west yorkshire
- Bike:gas gas aire
- Club:Bumpys
Posted 28 February 2009 - 11:14 AM
HI EVERYBODY , IT'S BEEN A WHILE SINCE I POSTED SO THINGS MUST HAVE BEEN GOING O.K. WITH PROJECT . I AM NEARING END OF REBUILD SO SOME THINGS ARE REALLY HARD TO SOURCE SUCH AS SPOKES FOR REAR WHEEL FOR 1990 GAS GAS 325 AIRE , THEY HAVE BEEN ON BACK ORDER WITH GAS GAS FOR THE LAST 5 MONTHS AND STILL NO SIGN . IF ANYBODY HAS ANY OR HAS THE LENTH MEASUREMENTS IT WOULD BE A GREAT HELP , CHEERS NICKRHINOS
#2
-
- Site Supporter
-
- 2,553 posts
Advanced Member
- Location:Edinburgh
- Club:Stevenson, Perth & District, Edin' St George.
Posted 28 February 2009 - 11:47 AM
Take one out from each side , measure length, thickness, and bend on end.
Try http://www.central-wheel.co.uk/
If they cant help I'm sure they can point you in the right direction.
Try http://www.central-wheel.co.uk/
If they cant help I'm sure they can point you in the right direction.
Cleaning a section is like setting fire to Joanna Lumleys shoes.
(.)(.) + £ = ( . )( . )
#3
-
- Members
-
- 27 posts
Member
- Location:leeds , west yorkshire
- Bike:gas gas aire
- Club:Bumpys
Posted 28 February 2009 - 05:58 PM
THANKS FOR CONTACT WILL GIVE THEM A CALL ON MONDAY . SLIGHT PROBLEM AS SPOKES ALL BROKEN ON STRIPPING BACK IN NOVEMBER , ONLY HAVE ONE INTACT SPOKE , CHEERS NICK
#4
-
- Members
-
- 650 posts
Advanced Member
- Location:Auckland NZ
- Bike:OSSA TR280i
- Club:Waitemata
Posted 01 March 2009 - 08:44 AM
Ay up Nick,
I most likely have a full set of spokes at home (NZ) for the old bikes and definately have a 1989 250 aire in the bike shed to measure the spoke length in case not, will have a look tomorrow and PM you.
Ta ta, PeterB.
I most likely have a full set of spokes at home (NZ) for the old bikes and definately have a 1989 250 aire in the bike shed to measure the spoke length in case not, will have a look tomorrow and PM you.
Ta ta, PeterB.
#5
-
- Members
-
- 27 posts
Member
- Location:leeds , west yorkshire
- Bike:gas gas aire
- Club:Bumpys
Posted 01 March 2009 - 10:40 AM
HI PETERB , GREAT NEWS, SHOULD HAVE POSTED QUESTION EARLIER . LOOK FORWARD TO HEARING FROM YOU , NICK
#6
-
- Members
-
- 650 posts
Advanced Member
- Location:Auckland NZ
- Bike:OSSA TR280i
- Club:Waitemata
Posted 04 March 2009 - 12:54 AM
Hi Nick,
I checked the garage and do not have a full set of spokes for the older bikes. The spoke lengths are 202mm spkt side, and 197 disc side, 3.5mm dia. They are the same spokes for all GG trial models up to 1996.
Bye, PeterB.
I checked the garage and do not have a full set of spokes for the older bikes. The spoke lengths are 202mm spkt side, and 197 disc side, 3.5mm dia. They are the same spokes for all GG trial models up to 1996.
Bye, PeterB.
#7
-
- Members
-
- 27 posts
Member
- Location:leeds , west yorkshire
- Bike:gas gas aire
- Club:Bumpys
Posted 04 March 2009 - 08:18 PM
HI PETERB , THATS GREAT , I CAN GET ANGLE FROM MY SAMPLE SPOKE AND GET SOME NEW ONES MADE UP LOCALLY . THANKS FOR EVERYBODYS HELP . ENGINE JUST DELIVERED TO ALAN THE SPANNER AT WHITE BROS IN DARLINGTON , HE REALY KNOWS THE ENGINE AND HAS PLENTY OF PARTS . CHEERS NICKRHINOS
#8
-
- Members
-
- 27 posts
Member
- Location:leeds , west yorkshire
- Bike:gas gas aire
- Club:Bumpys
Posted 11 March 2009 - 09:25 PM
HI EVERYBODY , JUST A COUPLE OF WHAT I HOPE ARE THE LAST THINGS . SHOPPING LIST GOES AS FOLLOWS: 1off WHITE SEAT , 1off REPLACEMENT D.E.P. SILENCER and WHATEVER ANYBODY HAS OR KNOWS OF RED AND BLUE GRAPHICS , CHEERS NICK
#9
-
- Admin
-
- 5,950 posts
Site Owner
- Location:Fife, Scotland
- Club:Spearmint Rhino
Posted 11 March 2009 - 09:36 PM
Topic merged with existing one, but please use the Free TC Classifieds for Wanted Ads. You are far more likely to get a response that way.
PS. Typing in capitals on a Forum is considered SHOUTING
PS. Typing in capitals on a Forum is considered SHOUTING
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
