I owned a 2006 280 and just got a 2009 280 and i find the 2009 to be just a little soft off the bottom
anyone else?
0
3 replies to this topic
#1
-
- Members
-
- 58 posts
Member
- Location:Hesperia, Ca
- Bike:2010 280 gas gas
Posted 16 July 2009 - 09:39 PM
#2
-
- Members
-
- 451 posts
Advanced Member
- Location:Massachusetts USA
- Bike:09 GG 250
Posted 16 July 2009 - 09:56 PM
Break-in? Jetting? Do you have the same gearing? The taller gearing can make it feel that way right off the bottom.
#3
-
- Members
-
- 58 posts
Member
- Location:Hesperia, Ca
- Bike:2010 280 gas gas
Posted 16 July 2009 - 10:23 PM
the 2006 and 2009 were/are both stock
the only adjustments i did to both was the needle and air screw for the elevation
i was considering bumping up the timing but i dont know if this can be done with the engine maping/switch
the only adjustments i did to both was the needle and air screw for the elevation
i was considering bumping up the timing but i dont know if this can be done with the engine maping/switch
#4
-
- Site Supporter
-
- 8,055 posts
Advanced Member
- Location:TeXaS
- Bike:Sherco
- Club:NTTA, TXTC
Posted 17 July 2009 - 03:14 AM
hannon, on Jul 16 2009, 07:23 PM, said:
the 2006 and 2009 were/are both stock
the only adjustments i did to both was the needle and air screw for the elevation
i was considering bumping up the timing but i dont know if this can be done with the engine maping/switch
the only adjustments i did to both was the needle and air screw for the elevation
i was considering bumping up the timing but i dont know if this can be done with the engine maping/switch
Know your jetting! If it came too small on the pilot jet it will be weak off the bottom.
Ride it Like it was one of your old Girlfriends, If you still remember how!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
