, hasn't got a kill switch fitted so assuming i wire it to short out the coil which terminal do i connect it to ?
0
Wiring A Kill Switch To A Mk3 Mar
Started by Old trials fanatic, Nov 23 2009 08:08 PM
3 replies to this topic
#1
-
- Members
-
- 2,061 posts
Advanced Member
- Location:Derbyshire
- Bike:James Bulto TY Ossa
- Club:Peak Classic, Dales Classic, AA, Tufty.
Posted 23 November 2009 - 08:08 PM
My latest MAR, this ones not in bits , hasn't got a kill switch fitted so assuming i wire it to short out the coil which terminal do i connect it to ?
, hasn't got a kill switch fitted so assuming i wire it to short out the coil which terminal do i connect it to ?
The Victor Meldrew of Trials Central. Dont believe everything you read about me because the truth is much much worse !! LOL
#2
-
- Members
-
- 93 posts
Member
- Location:Wantage, Oxfordshire
- Bike:75 Ossa MAR
- Club:Alton & DMC & CC
Posted 23 November 2009 - 09:40 PM
Ooh, probably very unsafe then, best you sell it to me to keep you out of danger...
Mike
Mike
#3
-
- Site Supporter
-
- 2,650 posts
Advanced Member
- Location:Birmingham UK
Posted 23 November 2009 - 11:31 PM
Assuming you're using the Jap kill button with two wires, one goes to the larger spade terminal on the HT coil (should be the blue wire from the stator if it's original wiring) the other to earth.
#4
-
- Members
-
- 2,061 posts
Advanced Member
- Location:Derbyshire
- Bike:James Bulto TY Ossa
- Club:Peak Classic, Dales Classic, AA, Tufty.
Posted 24 November 2009 - 08:02 PM
Thanks Woody just didnt want to damage anything.
The Victor Meldrew of Trials Central. Dont believe everything you read about me because the truth is much much worse !! LOL
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
