Jump to content

Clutch Problem Following Engine Install.


m1key
 Share

Recommended Posts

Alright lads just wondering if anyone could help. I had recently removed the engine from my 2007 SY250 to get the sump bolt threads redone on the casing which was done at a local bike shop. When putting the engine back in the bike I have noticed that I seem to have no spring action on the clutch arm on the engine casing (never really payed much attention to this when removing clutch slave in the first place). The clutch master cylinder appears to work fine but I have no spring return from the clutch itself. I've never really had much to do with this on the bike so was just after any advice/ diagnosis.

Thanks

Mike.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...