Can't seem to get the cases split on a '01 2.9 whats the trick?
0
4 replies to this topic
#1
-
- Members
-
- 213 posts
Advanced Member
- Location:Austin, TX
- Bike:2008 Rev3 270
- Club:CTTA
Posted 31 May 2010 - 12:59 AM
#2
-
- Members
-
- 129 posts
Advanced Member
- Location:Concord, NC
- Bike:Beta Dealer
- Club:Metrolina Trials Riders
Posted 31 May 2010 - 01:08 AM
Obvious first question is, do you have all of the bolts out?
You will more than likely need a case-splitting tool to get them apart anyway. Motion Pro makes one that works very well.
You will more than likely need a case-splitting tool to get them apart anyway. Motion Pro makes one that works very well.
#3
-
- Members
-
- 1,829 posts
Advanced Member
- Location:Redneck Hell
- Bike:2000 Sherco 2.9
- Club:Team WGASA, Bent Fenders
Posted 31 May 2010 - 01:57 AM
When I split my 2000 2.9 I used Wayne's Helpful Manual
If all the bolts are out a rubber mallet applied with the right thunkage in the correct outward from center direction worked well for me.
If all the bolts are out a rubber mallet applied with the right thunkage in the correct outward from center direction worked well for me.
"You can't fix stupid...but it will heal (eventually)"
#4
-
- Site Supporter
-
- 8,058 posts
Advanced Member
- Location:TeXaS
- Bike:Sherco
- Club:NTTA, TXTC
Posted 31 May 2010 - 03:54 AM
Neil King, on May 30 2010, 07:59 PM, said:
Can't seem to get the cases split on a '01 2.9 whats the trick?
Amature case flogger!
Ride it Like it was one of your old Girlfriends, If you still remember how!
#5
-
- Members
-
- 213 posts
Advanced Member
- Location:Austin, TX
- Bike:2008 Rev3 270
- Club:CTTA
Posted 01 June 2010 - 12:38 AM
Yep, that's me.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
