Jump to content

98 Beta Techno


laffing-gas
 Share

Recommended Posts

Hi my brother in law is selling his 1998 beta techno it is in good clean condition with purple and grey plastics.

The left fork seal is leaking a little and the rear brake needs bleeding apart from that the bike is fine.

If anyone is interested p.m me and i will forward you his phone number he lives in morley west yorkshire.

He paid

Link to comment
Share on other sites

 

 
 

I have a '97 Techno. I note with interest the bit about "the rear brake needs bleeding". I have spent HOURS trying to bleed mine.

The caliper's been stripped, I've changed the banjo bolts for Goodridge ones, I've tried a new bleed nipple, I've tried it with and without the little ball-bearing that sits behind the bleed nipple. I tell yer, I was wearing more brake fluid than the bike was carrying :wall: !

The problem was not getting the fluid through it's the fact that I can't get any sort of decent pressure. I've now decided that it MUST be down to the seals in the master cylinder. Although they look ok they must be releasing the pressure when it's applied hard. Does that sound reasonable? Are seals readily available?

Link to comment
Share on other sites

 

Back off the plunger going into the master cylider till its barely moving the piston and take it in half a turn at a time ,bleeding as you go and this should give you a pedal if everything else is ok. Hope this helps , been there!!

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...