Hi
is there listed any were how to change oil seals on this forum?
Cheers
David
0
Changing Oil Seals?
Started by smallboy, Aug 15 2010 07:24 PM
4 replies to this topic
#1
-
- Members
-
- 62 posts
Member
- Location:Bicester
- Bike:BETA EVO 250 2010
- Club:Berkhamsted
Posted 15 August 2010 - 07:24 PM
#2
-
- Members
-
- 601 posts
Advanced Member
- Location:Lochaber
- Bike:09 Paxau Sherco 125
- Club:L&DMCC
Posted 15 August 2010 - 07:33 PM
Which oil seals? Fork oil? Crank seals, clutch case o-ring, clutch side gasket, sprocket shaft?
#3
-
- Site Supporter
-
- 525 posts
Advanced Member
- Location:Halfway between Aberdeen and Inverness
- Bike:250 GG, 250 Beamish
- Club:BAMCC
Posted 15 August 2010 - 08:35 PM
I'll hazard a guess at fork seals if it's anything to do with your other post?
Not so sure about the Xispa forks as I've only ever seen one Xispa since they came out but there's a few vids on YooToob you could watch if you've never done a job like this before? Watchy Here
Might be worth asking the Sherco guys? There was a rumour once that the Xispa was kind of like a Sherco
GJ
Not so sure about the Xispa forks as I've only ever seen one Xispa since they came out but there's a few vids on YooToob you could watch if you've never done a job like this before? Watchy Here
Might be worth asking the Sherco guys? There was a rumour once that the Xispa was kind of like a Sherco
GJ
He who dies with most toys wins.
It's all in the wrist action.............
It's all in the wrist action.............
#4
-
- Members
-
- 62 posts
Member
- Location:Bicester
- Bike:BETA EVO 250 2010
- Club:Berkhamsted
Posted 16 August 2010 - 01:30 PM
Hi
Sorry,the fork seals.
Sorry,the fork seals.
#5
-
- Members
-
- 281 posts
Advanced Member
Posted 21 August 2010 - 12:11 PM
They use the Marzzochi forks I think so follow a Gasgas guide.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
