Hi
I am looking for general info on the above and any help would be appreciated.
Fuel Oil ratio.
Fork Air Gap or mills per leg.
Plug and gap.
Kind regards
Martin
GAS GAS JTR160 1996
Started by Triple_X, Oct 13 2010 07:13 PM
3 replies to this topic
#1
Posted 13 October 2010 - 07:13 PM
#2
Posted 13 October 2010 - 10:22 PM
You should be able to find your info here might need to search! http://www.gasgas.co...nical/Home.html
A Tiger Cub is for life not just for Christmas!
#3
Posted 14 October 2010 - 04:25 PM
Triple_X, on 13 October 2010 - 07:13 PM, said:
Hi
I am looking for general info on the above and any help would be appreciated.
Fuel Oil ratio.
Fork Air Gap or mills per leg.
Plug and gap.
Kind regards
Martin
I am looking for general info on the above and any help would be appreciated.
Fuel Oil ratio.
Fork Air Gap or mills per leg.
Plug and gap.
Kind regards
Martin
Hi Martin.
70 or 80:1 premix, full-synthetic oil.
300cc's per leg for fully drained fork.
NGK BPR5EIX set to .024".
Jon
#4
Posted 14 October 2010 - 08:51 PM
Hi
Thank you both for the tips.
Bike seems sound, all there and starts well.
Just need to make sure I have the settings and give it a good clean and service.
I bought as an alternative to my two Sherpa's as quite a few of the local trials that run twin shocks appear to be set out out by people who have never ridden one!
Kind regards
Martin
Thank you both for the tips.
Bike seems sound, all there and starts well.
Just need to make sure I have the settings and give it a good clean and service.
I bought as an alternative to my two Sherpa's as quite a few of the local trials that run twin shocks appear to be set out out by people who have never ridden one!
Kind regards
Martin
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users















