Jump to content

GasGas Kickstart Shaft Conversion


rustybay
 Share

Recommended Posts

Hi There

Can anybody help. I have broken my kickstart shaft on my JT35 and now need to convert it from a 16 mm to a 18 mm. Has anyone done this conversion - if so all information would be much appreciated.

Information required:

1. The dia of the hole I need to enlarge in the outer casing to accept the new seal and bush

2. The item numbers for the new seal and the new shaft bush

Finally will any kickstart arm now fit the 18 mm spline shaft.

Thank in advance

Wayne

Link to comment
Share on other sites

 
  • 1 month later...

Sorry I can't help you with the question, but I just broke my kickstart lever on my 16mm shaft and am in need of the clamp and lever. When I pulled the clamp the allen bolt on top busted off, so I drilled it out and when I went to retap it the tap broke off inside. The tap is to hard to drill into and now I'm stuck. Is your old one available if you still have it? Are you in the US?

Thanks ( I hope )

Brandon

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...