37 replies to this topic

[charlie prescott]

Hi Guy's
Hi OTF
You know you don't mean that! You know that all the above "Bantams" should be in a "BRITSHOCK" class or better still The "TRICK-SHOCK" class. And you will find most of these bikes are having just has much money thrown at them, and probably costing has much as putting say a decent "ARIEL" together. It is amazing how many new ventures have started up building parts for the humble BSA BANTAM. "Trials" bike, So how much is a five speed trials cluster? Even the cases are starting to look like somthing from Japan.
Has enyone come up with a "AirCooled" radiator for them yet??
Regards Charlie.

[old trials fanatic]

charlie prescott, on 05 February 2012 - 07:15 PM, said:

Hi Guy's
Hi OTF
You know you don't mean that! You know that all the above "Bantams" should be in a "BRITSHOCK" class or better still The "TRICK-SHOCK" class. And you will find most of these bikes are having just has much money thrown at them, and probably costing has much as putting say a decent "ARIEL" together. It is amazing how many new ventures have started up building parts for the humble BSA BANTAM. "Trials" bike, So how much is a five speed trials cluster? Even the cases are starting to look like somthing from Japan.
Has enyone come up with a "AirCooled" radiator for them yet??
Regards Charlie.

Have heard of 5 speed clusters but nothing on prices yet Charlie. One thing for sure the Bantam, especially the last one in the pics, would be more competitive than the decent "ARIEL" however personally i would prefer the Ariel.

My own take on this is that no matter which class they enter the more that are being built wether a "Bantam" or an "Ariel" or anything inbetween then thats a bonus for Classic Trials.

[esteve]

ElGringo, on 30 January 2012 - 10:57 PM, said:

I have a lot of questions but i was wondering does anyone have some basic guidelines to get me going?

I've looked at a few posts around the swingarm width and modifications, using a 4.00 x 18 tyre etc.

I think it will probably be a "modern" front end, TS50 or the like. What sort of shock length would i be looking for?

Please forgive all my questions, i'm really looking forward to falling off very soon!

Cheers

Chris

MZ forks are relatively easy to find, but then you will need yokes......and they are not Pre65....

Some Bantams here: http://s1083.photobu...Esteve/Bantams/

Sublime



to Drayton



to an exercise in how far you can go:

Edited by Esteve, 26 February 2012 - 07:05 PM.

[andy m]

There's a set of 35mm MZ forks for sale on front page.....

[old trials fanatic]

Esteve, on 05 February 2012 - 10:59 PM, said:

MZ forks are relatively easy to find, but then you will need yokes......and they are not Pre65....

Some Bantams here: http://s1083.photobu...Esteve/Bantams/

Sublime



to Drayton



to an exercise in how far you can go:

Two of these bikes ride at our events regularly and you can go a LOT farther than Jonathans believe me

Edited by Old trials fanatic, 06 February 2012 - 10:27 AM.

[elgringo]

---

Don't want these Ads? Why not help support TC and sign-up as a Trials Central Supporter

[elgringo]

Thanks for all the pics and info guys, went to the show yesterday and picked up a couple of bits.

Will be making a proper start shortly, i have a TS50 front end on it's way.

I'll post some progress pictures up soon if thats ok?

Cheers

Chris

[wetfeet]

One of my dads hacks nowt like the exotic bantams floating about but he likes the more original bikes saying that he does have a trick bantam and a couple more plunger frame bantams he has been riding/using these for years well before they became popular

[esteve]

wetfeet, on 27 February 2012 - 05:13 PM, said:

One of my dads hacks nowt like the exotic bantams floating about but he likes the more original bikes saying that he does have a trick bantam and a couple more plunger frame bantams he has been riding/using these for years well before they became popular

Just lovely.

[elgringo]

Cracking pics, many thanks.

I now have a TS50 front end, taper head bearings and material to turn some bearing cups and a Bultaco Alloy rear wheel and brake.

A Bitsa and a half i'm sure you will agree

Frame, swingarm, bars and yokes are being sand blasted today hopefully so i should have a semi rolling chassis by sometime next week.

Forks need a little prep work but it shouldn't take too long.

A quick question if i may, whilst in the future i will probably go down the electronic ignition route, what's the best way to run a Bantam, spark only as i'm not worried about lights.

I have the a stator "star" with coils but no stator plate or points etc.

I was thinking along the lines of junking the lighting coils, replacing the ignition coil with a modern replacement and then getting a Rooster Booster to give me a spark.

Does this sound feasible?

Cheers

Chris

[totalshell]

scrap the lot get the electrix set up simple to fit. no probs in use. job done.

[elgringo]

Hi All,

Thought i'd up date the thread with a couple of piccys of progress so far.

Started with this



and this



Got these





and this



a bit of blasting and painting





and a few bits and we're about here









Still a way to go but i'm chuffed with the progress

Cheers

Chris

Edited by ElGringo, 02 April 2012 - 12:15 PM.

[b40rt]

Always wondered what those things in the garden were for !

[mikey_01]

hey there this is how my bantam build if going just a pic to show you,

bantam

Album: bsa trials

Uploaded 12 May 2012 - 00:37

the bantam

Album: bsa trials

Uploaded 12 May 2012 - 00:36

[elgringo]

Looking good Mikey, hope your not too bad after your off.

Progress is slow at the moment but i've done a bit more

Due to teh lack of offset on the TS50 forks i've had to move the tank back a bit







Rear Tank Mount



Footrest bracket done, just needs final fit



Seat Base made



Now looking a bit like this





Cheers

[mikey_01]

elgringo, on 28 June 2012 - 12:08 PM, said:

Looking good Mikey, hope your not too bad after your off.

Progress is slow at the moment but i've done a bit more

Due to teh lack of offset on the TS50 forks i've had to move the tank back a bit







Rear Tank Mount



Footrest bracket done, just needs final fit



Seat Base made



Now looking a bit like this





Cheers

thanks dude on the mend all ready bantam needs new bars thats all, this is how she sits now

bantam

Album: bsa trials

Uploaded 28 Jun 2012 - 15:02

bantam

Album: bsa trials

Uploaded 28 Jun 2012 - 15:02