Jump to content


Photo
- - - - -

Fantic 200


  • Please log in to reply
3 replies to this topic

#1 drongo

drongo

    New Member

  • Members
  • Pip
  • 19 posts
  • Location:Australia
  • Bike:Fantic 200
  • Club:Oakliegh

Posted 15 March 2012 - 09:01 AM

I have fitted a set of new clutch plates but still get slip in the higher gears, 4th, 5th ,6th.Do not feel any slip in lower gears. There is free play at the lever & the action is light & smooth.Any thoughts? Also my rear brake plate broke at the swing arm location pin, is this a weak point or I am unlucky? My wonderful machinist friend made me a new one.


Ads By Google User is online

Ads By Google
  • Ad Bots


Don't want these Ads? Why not help support TC and sign up as a Trials Central Supporter?

#2 gasgas249uk

gasgas249uk

    Advanced Member

  • Site Supporter
  • 814 posts
  • Location:Down South
  • Bike:80s-90s rare Catalan

Posted 15 March 2012 - 09:34 AM

Try a very light gear oil or ATF re the slipping.The oil will disperse from the plates quicker. If this fails , replace the springs as they are probably old and saggy after all those years
WWW.RETROTRIALS.COM

#3 drongo

drongo

    New Member

  • Members
  • Pip
  • 19 posts
  • Location:Australia
  • Bike:Fantic 200
  • Club:Oakliegh

Posted 15 March 2012 - 10:34 AM

Ok will give that a go. Then try some new springs if needed. Thanks

#4 totalshell

totalshell

    Advanced Member

  • Members
  • PipPipPip
  • 1,736 posts
  • Location:lancashire (just)
  • Bike:in several boxes....
  • Club:Rossendale Harriers, Clarks Commando's

Posted 15 March 2012 - 09:02 PM

the springs are only a couple of quid whip em in job done.
We few .. We happy few Yorkshiremen..

let Richard III rest in York..




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users