Jump to content


Photo
- - - - -

Fantic 200


  • Please log in to reply
3 replies to this topic

#1 drongo

drongo

    New Member

  • Members
  • Pip
  • 19 posts
  • Location:Australia
  • Bike:Fantic 200
  • Club:Oakliegh

Posted 15 March 2012 - 09:01 AM

I have fitted a set of new clutch plates but still get slip in the higher gears, 4th, 5th ,6th.Do not feel any slip in lower gears. There is free play at the lever and the action is light and smooth.Any thoughts? Also my rear brake plate broke at the swing arm location pin, is this a weak point or I am unlucky? My wonderful machinist friend made me a new one.


Ads By Google User is online

Ads By Google
  • Ad Bots


Don't want these Ads? Why not help support TC and sign up as a Trials Central Supporter?

#2 gasgas249uk

gasgas249uk

    Advanced Member

  • Members
  • PipPipPip
  • 970 posts
  • Location:Down South
  • Bike:80s-90s rare Catalan

Posted 15 March 2012 - 09:34 AM

Try a very light gear oil or ATF re the slipping.The oil will disperse from the plates quicker. If this fails , replace the springs as they are probably old and saggy after all those years
WWW.RETROTRIALS.COM

#3 drongo

drongo

    New Member

  • Members
  • Pip
  • 19 posts
  • Location:Australia
  • Bike:Fantic 200
  • Club:Oakliegh

Posted 15 March 2012 - 10:34 AM

Ok will give that a go. Then try some new springs if needed. Thanks

#4 totalshell

totalshell

    Advanced Member

  • Members
  • PipPipPip
  • 1,874 posts
  • Location:lancashire (just)
  • Bike:in several boxes....
  • Club:Rossendale Harriers, Clarks Commando's

Posted 15 March 2012 - 09:02 PM

the springs are only a couple of quid whip em in job done.
We few .. We happy few Yorkshiremen..

let Richard III rest in York..




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users