I have fitted a set of new clutch plates but still get slip in the higher gears, 4th, 5th ,6th.Do not feel any slip in lower gears. There is free play at the lever & the action is light & smooth.Any thoughts? Also my rear brake plate broke at the swing arm location pin, is this a weak point or I am unlucky? My wonderful machinist friend made me a new one.
0
3 replies to this topic
#1
drongo
-
- Members
-
- 19 posts
New Member
- Location:Australia
- Bike:Fantic 200
- Club:Oakliegh
Posted 15 March 2012 - 09:01 AM
Ads By Google 
Ads By Google
-
- System
#2
gasgas249uk
-
- Site Supporter
-
- 530 posts
Advanced Member
- Location:Down South
- Bike:80s-90s rare Catalan
Posted 15 March 2012 - 09:34 AM
Try a very light gear oil or ATF re the slipping.The oil will disperse from the plates quicker. If this fails , replace the springs as they are probably old and saggy after all those years
WWW.RETROTRIALS.COM
#3
drongo
-
- Members
-
- 19 posts
New Member
- Location:Australia
- Bike:Fantic 200
- Club:Oakliegh
Posted 15 March 2012 - 10:34 AM
Ok will give that a go. Then try some new springs if needed. Thanks
#4
totalshell
-
- Members
-
- 1,576 posts
Advanced Member
- Location:lancashire (just)
- Bike:Audit due...
- Club:YCMCC, Red Rose, SAFC, Clarks Commandos
Posted 15 March 2012 - 09:02 PM
the springs are only a couple of quid whip em in job done.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
