13 replies to this topic

[stevieb]

Preparing my SY175f for a trial this morning, the bike 'blew over' in the wind and fell onto the left side, the gear lever took the blow and punctured the engine casing, end of day !!
My problem now is findind a replacement casing & gasket, i know that it is a Yamaha TTR engine, but is this an import and are engine parts easily available ? I haven't have a great deal of joy in the past sourcing Scorpa parts. Other than Birketts, can anyone advise where else I can sort this problem ??

Edited by stevieb, 14 April 2012 - 07:34 PM.

[archie]

---

Don't want these Ads? Why not help support TC and sign-up as a Trials Central Supporter

[archie]

http://www.ebay.co.u...=item1e68b5ba1b

http://www.ebay.co.u...=item2a0d6ec688

Two for starters

[stevieb]

Thanks Archie, the first one does look similar, but it's not the same & the second one, again looks similar and would probably get me out & riding until I could find a new/newer one.
I'll have a good look through Ebay.

[archie]

stevieb, I think you'll find it's the same casting. The second one does look a bit rough mind (!), but nothing that a bit of high build primer and a silver top coat won't sort.

All the Scorpa four stroke 125/175/200 derivaties are based upon a stock TTR125 engine, and so casings etc., are usually pretty easy to find. The gaskets are pretty expensive, but can usually be re-used if removed carefully.

There is a load of info on this forum on mods to these bikes as well which is worth checking out (if you havn't allready) which is where I got allot of useful info when I got my bike.

[stevieb]

Thanks, I also need a gear lever, does anyone know if its the same as the SY250 2t ?

[jtrials31]

This apparently happened to my SY250 as well, but it has been jb welded so it just looks bad. Are they relatively easy to find for them as well? And where abouts on the price range?

[stevieb]

I managed to repair the casing to get riding again, but have since bought a new Yamaha casing (£60) and a slightly shorter gear lever (£36) from Birketts.
My mate has ridden my bike & is so impressed he 'has to have one' but there doesn't seem to be any about for sale, anyone know of a good 175/200f up for grabs please let me know.

Edited by stevieb, 26 April 2012 - 09:49 AM.

[archie]

stevieb,

I may be able to help you. Drop me a PM.

Regards

Archie

[godzilla]

Jtrials31 - is it the clutch or stator case you need?

[stevieb]

Thanks, I have repaired the damaged casing & bought a new one. Steve

[jtrials31]

---

Don't want these Ads? Why not help support TC and sign-up as a Trials Central Supporter

[jtrials31]

Clutch side. The other side is very scratched up but I think it will still polish out when I get around to it

[godzilla]

Clutch side cases for 250 2T are around £450 \ $725 new, used ones come up for sale every so often. I have a nice one in my spares box.

[stevieb]

Thanks very much but I am now sorted. Steve

[jtrials31]

godzilla, on 05 May 2012 - 05:58 PM, said:

Clutch side cases for 250 2T are around £450 \ $725 new, used ones come up for sale every so often. I have a nice one in my spares box.

Yikes! It might be a while before that gets replaced then!