Jump to content

Rev 3 Kill Switch


keith74
 Share

Recommended Posts

Just bought a 250cc rev 3 and the original kill switch is still fitted to the bars but isnt wired up.Now having had a quick look at the wiring diagram and the bike it dosent really match up.There are what im guessing are plugs for the headlight(thats been removed) just behind the topyoke.

Does anyone have any idea if the killswitch wires will be in this plug or if i should just run a wire from the coil to the killswitch and back?Should i fit an aftermarket killswitch as heard some bad stories of the original killswitch failing?

Any help welcome.Cheers

Link to comment
Share on other sites

 

Yes. Fit an aftermarket one. Take one lead down to the coil mounting (or another reliable earth) and the other connects to a black (or might be black and white - can't remember which) wire that you should find in the area behind the headstock if you take off the right hand grill that fills in the hole in the frame. Hope that makes sense.

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...