mike_mc Posted June 9, 2012 Report Share Posted June 9, 2012 Hello, new to the forum and to trials. Recently purchased a 2001 Rev 3 270 and have recently noticed a definite "clunk" in the front. Thought it was the head bearings, but further research investigation has made me find that the front disk is rotating in its mounts. ( I'd say I can rotate it back and forth about a millimeter on the outside edge.) I know they are supposed to be floating discs, but that much? Any specs as to how much play (I can't find any). Lastly, is the remedy new spacers, or ? Thanks in advance for the help. Quote Link to comment Share on other sites More sharing options...
lineaway Posted June 10, 2012 Report Share Posted June 10, 2012 Double check the two mounting bolts on the brake and also the disc. And it is `normal`. Quote Link to comment Share on other sites More sharing options...
lankydoug Posted June 12, 2012 Report Share Posted June 12, 2012 My Techno was doing this and I replaced the bushings and the bolts that the disc is mounted with and it took 90% of the play out. Be careful when taking out the bolts as some are locktighted in with red locktight and must be heated slightly to release the locktight and not break the bolts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.