Jump to content

Cheap But Strong Fix To Ty 175 Sloopy Gear Change


davdeborg
 Share

Recommended Posts

hi as your aware the bush wears in the gear linkage cover on the tys especially the ty175

there is some fixes but some are expensive

ive tried something that works superbly and makes gear changeing a lot more responsive

as the main oil seal is behind the cover the outer oil seal behind the lever is more of a dust seal as no oil should be behind the cover

if it is then the inner seal has gone .

i removed the outer seal and fitted a 12mm x 19mm x12mm bearing that i pressed into the casing where the external oil seal should be pressed it in with my vice and two pieces of wood

so not to damage,

the bearing fits tight and the shaft is nice and snug this allowing the gear change shaft to turn smoothly and also supports it taking out any excess play that has accured over the years.

used it today and rode it hard lots gear changing and the differance is un discribable its like new .

for £5.25 it is ideal might not be for everyone but it deffinatly works first class

cheers

Link to comment
Share on other sites

 

 
 

hi mate did u use a roller type bearing ? not a seal abec bearing as ive been looking for a rubbersealed bearing in that size and struggerling to find it but can find loads of of roller bearings ? any chance in puttin come pics up soon of your bearing ? and finshed product :)

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...