Jump to content

Beta Bars And S3 Bar Ends


jackthelad98
 Share

Recommended Posts

 

Have you checked there is not a adapter on the bar ends for 2 different internal sizes,i bought a pr but were not s3's,at first i thought they were too big,but it turned out there was 2 plugs 1 over the other,remove the outer then they fitted,

Link to comment
Share on other sites

 

Mine never came with extra adapters, I made a little jig with a screw and a nut, put it in my drill press and hit it with a file

Think it only needed a half mill removed

Link to comment
Share on other sites

 
 
 

Hi,

my Gas Gas 125 had the same problem. The internal diameter is 12mm, and on every other bar i can find (ie my Beta 250) it is 14mm, so things like S3 bar ends wont fit....i like the drilling idea, and will do that!

Ian

Link to comment
Share on other sites

 
  • 2 weeks later...

Make sure you lay the bike over to tip the swarf out the handlebar after drilling. Be careful you don't scratch anything or drill on an angle. You don't want a bar snapping when you land of a big drop! :stupid:

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...