Jump to content

Jitsie Magnetic Kill Switch


davidorothy
 Share

Recommended Posts

 

 
 
 

Might be bing a bit simplistic here but. ...

The kill switch is basically a switch in line which earths out to the frame

You need to trace back your wires, one is effectively a supply to the switch (in) and the other (out) will connect to the frame.

If you've got a multi meter, set it to buzz and connect one probe to the frame and the other to the cable above where it connects to the frame, you should get a buzz, if so it's good, now check it at the kill switch itself as we'll, now disconnect the supply (in) part and connect the probe to there and press the kill switch and if working it should, buzz.

Hope that helps, it's hard to explain in words.

Link to comment
Share on other sites

 
 
  • 3 years later...
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...