Jump to content

Bantam Taper Roller Steering Head Bearings.


old trials fanatic
 Share

Recommended Posts

 

There isn't one that fits straight in, I had some sleeves made to take a std off the shelf bearing set. Without stripping I can't advise. If you use a decent bearing supplier they should sort out the nearest to your head stock and yoke stem size. The sleeves sit in the headstock the bearings drop in.

  • Like 1
Link to comment
Share on other sites

 
 
 
 
 
 

Hi Guy's.

Hi Blocky,

Look I will do the page on my web site ,about the tools and the jig this week end.

I have promised to do it for a long time , and have most of the pictures!

Just need to do the wording.

The tool for swaging the headstock is quite simple to make, and takes the size down to 47mm, to take an available bearing, and well worth doing.

Glad you enjoy BSA Otter.Com.

That's what I built the site for ?to give information about building up Brit Bikes, and where to get the parts to do this ,with less hassle .

"Britshocks" are still possibly the cheapest class, to get into Classic trials riding. If you use your head and not your wallet? To much anyway!!!

Regards Charlie.

  • Like 2
Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...