jsp Posted March 23, 2014 Report Share Posted March 23, 2014 (edited) Had the flywheel cover off my 2013 bike And it looks like is hasn't been off very often By the previous owner and there a bit of rust In there, given it all a good spray with wd40 Is there any way of any crap getting in to the Motor from there? And us it worth taking off the Flywheel And giving it a proper clean ? Edited March 23, 2014 by jsp Quote Link to comment Share on other sites More sharing options...
canada280i Posted March 23, 2014 Report Share Posted March 23, 2014 I sealed mine for the same reason, I took mine off and cleaned all behind it. There is no danger of getting water in the engine from there but I figure rust is not good Quote Link to comment Share on other sites More sharing options...
ric h Posted March 23, 2014 Report Share Posted March 23, 2014 If you take the flywheel off.Be sure to loctite (medium blue) the stator bolts.One of mine came loose and a peice of it was sheared off.The little chunk would occasionally get in the way of the ignition pickup and result in a no start mode. Quote Link to comment Share on other sites More sharing options...
jsp Posted March 24, 2014 Author Report Share Posted March 24, 2014 do I need any special tools to take the flywheel off ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.