Jump to content

Beta Techno Coolent


griff666
 Share

Recommended Posts

Had to drop the coolent out of the bike for mantanence and now ive done that the water system keeps bulding up with air /pressure any tips or tricks to bleedin the coolant system thanks as i never had problem with it before

Link to comment
Share on other sites

 

 
 
 
 
 

It is supposed to be a closed system under pressure. Think of it this way, the greater the difference between the coolant and the ambient air the more efficient the cooling system. Water boils at 100C at one atmosphere of pressure but at higher pressure the boiling temperature is higher than 100C so the cooling system is more efficient. That's why a pinhole leak in a cooling system is a problem. Not because it leaks fluid but because it depressurizes the system causing the coolant to boil. The coolant reservoir is meant only to supply coolant to replace lost fluid when the bike cools down again and the pressure in the cooling system becomes slightly less than atmospheric. This allows the system to replenish its coolant without sucking air into the system.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...