quo 1 Posted October 13, 2014 Author Report Share Posted October 13, 2014 ]just thought i'd put a couple of pics on now paints done managed to get a airbox off ebay this morning.a friends bringing it over on Sunday. Not had a reply over seat.but its an holiday over here so shops closed I also got a email off vallmoto this morning saying they are posting bits now they have everything i ordered[not airbox /speedo] it does make me wounder what stock they carry, Airbox etc is still listed as in stock on their website! Steve 3 Quote Link to comment Share on other sites More sharing options...
johnmartin247 Posted October 13, 2014 Report Share Posted October 13, 2014 It is looking good steve. Quote Link to comment Share on other sites More sharing options...
quo 1 Posted September 1, 2015 Author Report Share Posted September 1, 2015 Hi its seems to have taken an eternity,but the montesa is finally complete. A combination of being let down by parts suppliers,lack of motivation,because of part supplier and work meant it took far longer than i thought, it was also impossible to source a seat,so i made a fibreglass base and had it covered. Also a few 348 parts mixed in just to confuse matters further. The problem i have is that it fires up ok but smokes like no tomorrow under load in has very little power,would this be crank oil seals? I was told the engine was fully rebuilt when i bought it. Your help/advice would be much appreciated. Many thanks Steve 3 Quote Link to comment Share on other sites More sharing options...
tribet Posted September 4, 2015 Report Share Posted September 4, 2015 O.k it is a bit overdue but the painter was a perfectionist and#160; So here is the finished item. and#160; That's a beauty great job. Quote Link to comment Share on other sites More sharing options...
scot taco Posted September 4, 2015 Report Share Posted September 4, 2015 Steve,way to persevere and finish! It turned out very nice .I,m sure someone else with a bit more knowledge will chime in,but I,m wondering if it could be a carb problem. Quote Link to comment Share on other sites More sharing options...
brewtus Posted October 24, 2017 Report Share Posted October 24, 2017 On 8/14/2014 at 6:28 AM, wobbler said: exhaust picture ....it just screws straight in John - the footpeg pictures + S3 hardrock pegs Revived this thread because I thought the footpeg mods were pretty tidy! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.