Jump to content

Seeley Final Drive Shaft


griffiths of wales2
 Share

Recommended Posts

 

 

I can find one UK stockist that can get hold of this part.. is it by any chance interchangeable with the TLR 200 ?

I believe the TLR 200 part number is 23221-446-000, but this seems to be unavailable any where.

By the way, I am not sure if you intend to weld the sprocket to the shaft..

​A better solution may be to grind the teeth off an old sprocket with good splines and weld the centre to the outside of the new sprocket. You need to tack them together on the shaft to line the splines up (don't go mad and melt the oil seal). Once welded the old centre will be driving off the unworn splines outboard of the groove. The only thing to prevent the sprocket coming off the shaft is now the cover, but if the chain is in line this should not be a problem.

Edited by alan
Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...