Jump to content

Lock Tight Bolts


pearson23
 Share

Recommended Posts

 

 
 

.You don't need to loctite anything,just spannercheck it every 3or4 rides Loctite can make it difficult to remove things when necessary Better to copaslip all the fasteners so it will come to bits Mud and jet washing tends to seize things up

Link to comment
Share on other sites

 
 

I normally thread lock, Disk bolts, Sprocket bolts, Flywheel Nut, Kickstart bolt, Steering stem locknut and anything else that shakes loose.

I use a low to medium strength thread lock, It also stops bolts rusting in too, If you use the correct tools to undo them and providing the bolts are in good order to start with, There should be no problems.

  • Like 1
Link to comment
Share on other sites

 
 

Blue = stays put until you remove with proper tool and some muscle

Red = stays put forever unless heat, muscle and a leverage assisting device is used.

I just use the red stuff because it matches my bike better than the blue does :iamwithstupid:

  • Like 1
Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...