millerme Posted March 22, 2015 Report Share Posted March 22, 2015 does any one know the size for a Sherpa steering head bearing number or sizes Quote Link to comment Share on other sites More sharing options...
owen1960 Posted March 22, 2015 Report Share Posted March 22, 2015 does any one know the size for a Sherpa steering head bearing number or sizes dave renham.bultaco uk(in motion) do direct replacement taper rollers,no modifications to anything.i think there 25x45x12 but not 100 percent on the od.pyramid parts also do a compatable bearing too. 1 Quote Link to comment Share on other sites More sharing options...
tomtom385 Posted March 31, 2015 Report Share Posted March 31, 2015 Got mine from In Motion, good upgrade. i used a scaffold tube to drift the bottom inner race onto the tree, worked a treat. Quote Link to comment Share on other sites More sharing options...
bullylover Posted April 1, 2015 Report Share Posted April 1, 2015 I once tried to buy some at a bearing shop over here in Australia and I was told that they did not have that size on their lists of tapered bearings. They did not come that narrow only in a wider size. I mean the height of the bearing. It may be different over there. The In Motion ones are good and they are cheap compared to the bearings over here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.