Jump to content

Ty 350 Performance


 Share

Recommended Posts

hi folks I am new to the arena of trials and have just purchased a 1985 TY 350.

The bike runs as sweet as a nut but the previous 2 strokes I have ridden has had a more aggressive power delivery mine is very smooth right up to 3/4 throttle loads of torque but from 3/4 to wot the power stops building it doesn't drop off simply nothing more happens. It is standard bike it had a 145 main jet and a 38 pilot jet in the standard carby. I have changed the main jet to a 155 to see if it was short on fuel and also moved the clip position on the needle from the centre position to the lower clip position. Are these style of bikes all torque less aggression as MX bikes tend to be the opposite. any input would be great, cheers from a beginner.

Regards Loc

Link to comment
Share on other sites

 

 

The 250 cc is easier to ride in trials or sections whatever you will do. You can try to leave the bike as it is might adjust the engine with carb and timing. To the flywheel weight I would suggest to get a second for removing weight. I think the bike will be transformed likewise Mr. Jekill to Mr. Hyde. This effect might not be to your benefits.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...