Jump to content

2015 Factory 300 Jetting?


jmutiger
 Share

Recommended Posts

Hi guys, I was wondering what others with the same bike have done jetting wise to clean up the power delivery?

I ride between 500ft - 5000, probably mostly around 2500ft. But I'll tune as needed just want to know if there is a hot setup I should know about before starting the annoying procedure of airbox removal.

Link to comment
Share on other sites

 

 
 

Hi guys, I was wondering what others with the same bike have done jetting wise to clean up the power delivery?

I ride between 500ft - 5000, probably mostly around 2500ft. But I'll tune as needed just want to know if there is a hot setup I should know about before starting the annoying procedure of airbox removal.

 

Standard Kiehin sea level jetting is 45/125 range. I would not normally expect changes needed below 3000 ft. other than airscrew adjustment. Ck to see what you have in there first!

 

At higher altitudes, things can get a bit different, so a change to say a 48/50 pilot may be a good tradeoff for you, yet a lot of this may vary bike to bike even, and with that wide range of altitude you may have to find the balance.

Link to comment
Share on other sites

 
 

I thought you'd run leaner jetting if you ride higher.. Your suggesting richer jetting at altitude which doesn't seem normal to me.

Seems bass akwards but it all has to do with decreased air density and the ability to suck in fuel.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...