Jump to content

Beta Techno No Spark, Out Of Ideas


aaakev
 Share

Recommended Posts

hi lads, I dont seem to have a spark in my beta techno, its a 99 b6.

The bike started getting hard to start 3 weeks ago after washing, you could kick it 20 times and it will not start then just go on the next kick. If i stall or turn it off during a spin it will be the same trying to get it started again. Iv cleaned the carb and fitted a new plug, i have fuel, clean and oiled filter and tons of compression.

I removed the new plug and could not see any spark turning it over by hand so i held the plug while turning it and I didn't even get a small shock.

I did a few searches and it lead me to this forum and so i checked decided to check the stator, I disconnected the connection where the stator connects to the cdi and put a multi meter in the red and brown wires and am getting an average reading of 443.5 ohms, quite near to the recommended 480-480 ohms iv read and just Reading uk motoplats site they say between 400-450 is perfect

Any ideas before I put a match to it?

Thanks lads

Edited by aaakev
Link to comment
Share on other sites

 

 
 
 

Send the stator of to Bradford ignitions to test, Don't trust a multimeter as stators are voodoo magic.

How much do they charge for that and how much for a replacement?

Whats the procedure to remove it?

Cheers

Edited by aaakev
Link to comment
Share on other sites

 
 
 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...