tcrhino Posted March 1, 2016 Report Share Posted March 1, 2016 Triggered by a discussion in the GasGas forum: on an Ossa TR the rpm measurement is available from the ECU (according to documentation standard on CH1). Might be really simple to use that signal and transfer it to a digital display? Probably not really useful ( ) but could be a nice gadget. Did anyone ever consider it? Quote Link to comment Share on other sites More sharing options...
christianmoller Posted March 1, 2016 Report Share Posted March 1, 2016 Hmm, is it Square wave or a sinus wave,should be one per revolution. /C Quote Link to comment Share on other sites More sharing options...
canada280i Posted March 1, 2016 Report Share Posted March 1, 2016 The explorer tach/speedo panel fits straight on and plugs into the loom for a full range of options 1 Quote Link to comment Share on other sites More sharing options...
tcrhino Posted March 2, 2016 Author Report Share Posted March 2, 2016 The explorer tach/speedo panel fits straight on and plugs into the loom for a full range of options Thanks! Should have known that Quote Link to comment Share on other sites More sharing options...
lotus54 Posted March 3, 2016 Report Share Posted March 3, 2016 The Explorer tach/speedo is a TrailTech Vapor. Quote Link to comment Share on other sites More sharing options...
christianmoller Posted March 3, 2016 Report Share Posted March 3, 2016 Were do you connect it in the wire harness? /Christian Quote Link to comment Share on other sites More sharing options...
lotus54 Posted March 3, 2016 Report Share Posted March 3, 2016 I think I have an Explorer wiring diagram. Let me find it and post it. 1 Quote Link to comment Share on other sites More sharing options...
tcrhino Posted March 3, 2016 Author Report Share Posted March 3, 2016 (edited) The Explorer tach/speedo is a TrailTech Vapor. That's interesting: TrailTech sells smaller digital instruments as well. The full monty dash of the Explorer is too much for me, but a small tach / hour meter with maintenance intervals (change oil now!) would be very useful. Wonder if that plugs in to the Ossa wiring loom...? Edited March 4, 2016 by tcrhino Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.