mickthepieman Posted April 21, 2016 Report Share Posted April 21, 2016 How do I fit a kill switch to my 1972 Bultaco T 250 any ideas ? Mick Quote Link to comment Share on other sites More sharing options...
lbhbul Posted April 21, 2016 Report Share Posted April 21, 2016 Use a two wire kill switch, 1 to ground, 1 to coil/mag @ junction terminal. That's about all there is to it. Have a nice day Larry 4 Quote Link to comment Share on other sites More sharing options...
mickthepieman Posted April 21, 2016 Author Report Share Posted April 21, 2016 cheers Larry 1 Quote Link to comment Share on other sites More sharing options...
bondy Posted April 21, 2016 Report Share Posted April 21, 2016 1 wire if you use the original bultaco kill button earth is on the metal bracket that clamps round the bars singal wire gose to coil. 1 Quote Link to comment Share on other sites More sharing options...
floydbassman Posted April 22, 2016 Report Share Posted April 22, 2016 Make sure you have a good earthy return to the engine. I fitted a kill switch to my Ossa Gripper. riding round the garden, I decided to test the kill switch. Because the earthing was bad(current trying to go through the head bearings), it earthed through me instead, throwing me off the bike! I fitted a wire from the bars to the engine to cure that one. 3 Quote Link to comment Share on other sites More sharing options...
mickthepieman Posted April 22, 2016 Author Report Share Posted April 22, 2016 Thanks for the tips, there is no kill switch at all on the bike at the moment. just though i would put one on for safety. waiting for my new helmet before I go out on the bike. Mick Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.