Jump to content

Beta Evo, Centre Pipe, Best Way To Clean?


mickmc
 Share

Recommended Posts

 

For old GG bikes we made a special bracket to mount the mid boxes. Torch and compressed air on it. After a while you can take away the torch and it will still smoke and burn like a flametrower for some half hour. Brand clean. Outside may need some collor if it was painted before. lol.

Link to comment
Share on other sites

 
 

using flame is very aggressive but does offer near perfect internal results, however kiss goodbye to the exterior finish. Its also risky as its easy to destroy (melt) the fine steel 'wool' inside which can make the exhaust note a bit louder. I've done some experimenting using a heat gun with very good results. Its far less aggressive and you need no other tools. If you do this annually as preventative maintenance you can avoid the need for use of a flame to burn out very large deposits. Best practice is to keep a bucket full of water and water soaked rags handy. Using these you can control the external temperature to a degree.

This clip may give you some ideas

I take no responsibility if you attempt this and things go wrong

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...