Don't want these Ads? Why not sign up as a Trials Central Supporter.

andrep

Budget Trials Build

69 posts in this topic

22 hours ago, slicktop said:

Sucks that the kicker hits the frame, from the bottom photo it looks like it would clear.

Is it just barely rubbing the frame, or worse?  If it is just touching, I'd be tempted to indent the frame at the wear spot with a sledgehammer and large drift pin.

 

It´s a the nut on the top and hits pretty hard, might think about gutting rewelding the frame so there´s room for it or maybe redo the kicker.

12 hours ago, reggie said:

It would appear that you have a TR33 engine not TR32  you will need to find the proper wiring diagram and you will need to use the motoplat CDI box. Good luck.

I was never really sure about that, even contacted a guy on advrider and sent many pictures of the engine but he still thoughed it shpuld be a TR32.
Gonna try to wire in the CDI with a diagram found online but unfortunately can´t find a manual for a TR33

1 person likes this

Share this post


Link to post
Share on other sites

Don't want these Ads? Why not sign up as a Trials Central Supporter.

Okay, so no luck with the spark :mellow:
Figured I´d try this one but nothing, also tried this with three different coils.
http://www.motelek.net/motoplat/exoten/ligier/schema.png

Finaly remeasured the resistance but also read that if you have diodes it´s pretty much impossible to see if the stator works like that, so you´d have to send it to a specialist.
Blue to earth - 208 Ohm
Black to earth - 83 Ohm
White to earth - 104 Ohm
Blue to black - 283 Ohm
Blue to white - 307 Ohm
Black to white - 25 Ohm

Edited by andrep

Share this post


Link to post
Share on other sites

Finaly took the tyres up and got them properly on the rims, they´re straight now, will see how the tubless rear holds once I start ridin :D
The fuel tap and airfilter arrived which fit just perfectly.
27747243_1648128148563801_853378923_o.jpg
Had to start with the cables since I can´t get the flywheel off, so orderd a puller and a new clutch cable since the one I had is sticking like grazy and isn´t a good fit, throttle wasn´t also a bolt-on... neither is it nice but works good.
27746346_1648176635225619_156855345_o.jpg
 

With a new chain the bikes starts to look like an actual motorcycle.
27746454_1648128368563779_295927174_o.jpg

Hoping to sort out the motoplat, but still have the front engine mounts and an exhaust on the list.

2 people like this

Share this post


Link to post
Share on other sites

Raer mudguard from a GasGas TXT, will fit with some modifications so can start with the subframe and engine mounts. New grips and a clutch cable.
28080780_1657490764294206_433738503_o.jpg
Still nothing from the ignition part, but I got the puller and seems like sombody has changed the stator, because it looks like there´s been some milling done there...
28125187_1657490757627540_58910409_o.jpg
28079756_1657490770960872_1536427682_o.jpg

Share this post


Link to post
Share on other sites
4 hours ago, andrep said:

Raer mudguard from a GasGas TXT, will fit with some modifications so can start with the subframe and engine mounts. New grips and a clutch cable.
28080780_1657490764294206_433738503_o.jpg
Still nothing from the ignition part, but I got the puller and seems like sombody has changed the stator, because it looks like there´s been some milling done there...
28125187_1657490757627540_58910409_o.jpg
28079756_1657490770960872_1536427682_o.jpg

Think that milling is  just standard Beta work that was done by them when first manufactured .....if they painted after machining that then they would have possible  problems fitting some stators on the production line because of varying paint thickness deposited on those locating lugs.

Edited by oni nou
1 person likes this

Share this post


Link to post
Share on other sites

Coming along nicely!

Share this post


Link to post
Share on other sites

When you finish that I would like to see Takumi Narita ride it .....that would be something worth watching.

Share this post


Link to post
Share on other sites
7 hours ago, katana said:

Coming along nicely!

Thanks

1 hour ago, oni nou said:

When you finish that I would like to see Takumi Narita ride it .....that would be something worth watching.

Holy moly, this guy is crazy!!!

Share this post


Link to post
Share on other sites
1 hour ago, andrep said:

Thanks

Holy moly, this guy is crazy!!!

He is quite a good rider isn't he.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now