Jump to content

Oil Pump And Light


guy53
 Share

Recommended Posts

A friend ask me about taking off the oil pump on is TY ( 493-101 ), no problem just take the front cover off, unscrew the pump and pull the shaft and bushing off install a cover with a gasket: voila! the pump is out ( just block the oil intake at the motor ) I never had one that had a clip inside the clutch cover. Was I just lucky ?

And If I want to replace the standard light with LED any advise ?

Guy

Link to comment
Share on other sites

 

You forgot to mention you need to block off the carb oil feed.

I wouldn't fit an LED bulb, the voltage is not stable and most bulbs that would fit probably are probably not suitable for fluctuating AC.

Link to comment
Share on other sites

 
 
  • 2 years later...
On 7/21/2016 at 12:42 PM, tony27 said:

"A" model runs oil feed into intake port on barrel like most bikes of the time instead of into the carb like the later models running mikuni carbs Andy

Tony27

  I have the A model 250 1974 I took the oil pump out and blocked off the inlet tube and put in the plate but I'm wondering if the oil in the gas would call for a larger jet because of the thicker gas mixture?

 

 

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...