moulder Posted September 6, 2016 Report Share Posted September 6, 2016 Trying to remove the water pump impeller in order to remove the RHS engine case to inspect the clutch. Does the impeller pull off with the Case? I do not want to simply pull the impellor out if it's fixed behind the case etc and potentially break something . I can only assume that the impeller & shaft assemble can be pulled out with some pliers or the impeller is attached to the shafts with a LH thread? Either way do I pull the impellor off with the Case or am I missing something? The impeller appears to be the only thing holding case on now that I have removed the bolts, kick-start & water pump case. Cheers Tony Quote Link to comment Share on other sites More sharing options...
moulder Posted September 6, 2016 Author Report Share Posted September 6, 2016 Sorry, new phone with predictive text. Post title = scorpa sy250 water pump impeller removal Quote Link to comment Share on other sites More sharing options...
copemech Posted September 7, 2016 Report Share Posted September 7, 2016 If you cannot find a manual, email Paul at SHOP@THEHELLTEAM.COM Quote Link to comment Share on other sites More sharing options...
Cookiemonster Posted September 7, 2016 Report Share Posted September 7, 2016 [look on Nigel Birketts site sure that there are pdf manuals you can download from there Sorry, new phone with predictive text. Post title = scorpa sy250 water pump impeller removal Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.