Jump to content

Sherco 250 Breathing Oil Help! Please


walshy_7
 Share

Recommended Posts

Hi all I have a 2007 sherco 250 and was out riding the other day the bike started heavily smoking and breathing oil from the crank case I'm putting it down to crank

Seal on the clutch side? Question being is it a bad job is the seal on the outer side of the engine casing or is it full strip down ?

Any help would be greatly appreciated

Thanks Chris

Link to comment
Share on other sites

 

Can be replaced with the engine in the frame still.

The clutch needs to come off to do it & a new clutch cover gasket is the only extra part that you really need although I would suggest replacing the water pump seals while the clutch cover is off

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...