Jump to content

Hot Exhaust Melting Plastics


fixbroke
 Share

Recommended Posts

On 2016-12-15 at 3:20 AM, suzuki250 said:

Two stroke timing retards as the revs are increased (Opposite to a 4t motor)

As I mentioned, I'm newish to 2-strokes, but based on a little research it seems the advance should increase up to a certain point and then decrease (while still being advanced). This may or may not have to do with the expansion pipe, which (correct me if I'm wrong) is not present on our bikes.

Example 2t ignition curve:

curva01.jpg

I'm finally home and ready to fix this bike! I pulled the flywheel today and it looks to me like the hall effect sensor has been rubbing on the flywheel. Does this look normal to you lot? Should the flywheel have the little ridge shown in the pic, partially covering the semicircular hole, or is this the result of the rubbing?

20170108_164558.jpg

20170108_164636.jpg

Edited by fixbroke
Link to comment
Share on other sites

 

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...