Jump to content

Brake Grommets


diesel2607
 Share

Recommended Posts

 

 
 

The master cylinders on the Beta are Grimeca, so if you got pins and rubbers meant for another make of master cylinder, the rubbers may have a different diameter and not locate in the undercut.

Also some of the pins are 2mm longer and cause problems trying to adjust the clutch or brake as you can't screw them out far enough.

Link to comment
Share on other sites

 
 
 

Diesel   With all else being equal, the reason they are popping out is due to  a vacuum being created by the movement of the pin through the rubber boots.

 

Put plenty of Armor All on the rubber boots and be patient they will loosen up.

 

 

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...