Jump to content

Tiger Cub Engine Rebuild Questions


brucey
 Share

Recommended Posts

Hi,

I'm rebuilding my Cub engine and notice that the Cam Followers have 2 small blind holes in each Follower presumably for lubrication.  Do these face the back or the front of the engine, or doesn't it matter?  My Haynes Manual doesn't mention rotation.  I'm currently thinking towards the back to trap oil in them.

I'm also fitting a blind outer Camshaft Bush.  I presume I can now take the blanking screw out of the end of my side points Camshaft.  The timed breather will also be redundant and I will drill a small hole from the oil return chamber into the blind bush to lube the camshaft.

Any advice appreciated.

 

Bruce.

Link to comment
Share on other sites

 

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...